ElCarey
New member
I took the plastic off before i started it but definitely forgot to take off the barcodes on the pipes
What was done to your rig this week?
- Thread starter 10frank9
- Start date
bobfriesenhahn
Hooked
Where does the cold air come from?
DFanning
Active Member
looks good.
jamesrw30
Active Member
I keep thinking about doing this on my jk.
jeeeep
Hooked
I installed one in the JLU and wasn't expecting much but have to say, money well spent.
ElCarey
New member
My JT came with a Ram Air duct that takes air from the front grill and directly sends it to the CAI. I will take photos.
OverlanderJK
Resident Smartass
What if it’s 115 out like in the summer in Vegas? Where does the cold air come from?
Home depot brackets for redneck fabbing... paired with the ARB single brushless and the wayolife bracket. The extra body panel studs and empty mounting holes came in handy. The metal bracket holding the radiator overflow was a great grounding point for the compressor since it has 18-24 inches of the grounding wire...
I broke 7 of the 10 fender clips. After putting everything back together, I have 2 of the fender screws and I have zero clue where they go.
And after all that, the pressure switch stop working and the compressor won't stop and the safety valve is opened. But when filling a tire, it closes. So order a new one and more clips.
I broke 7 of the 10 fender clips. After putting everything back together, I have 2 of the fender screws and I have zero clue where they go.
And after all that, the pressure switch stop working and the compressor won't stop and the safety valve is opened. But when filling a tire, it closes. So order a new one and more clips.
Cousin Clyde
Hooked
Mike Pierson
Hooked
Reassembled the winch, thanks WARN! Cleaned the old grease out of the gear-set and applied a healthy amount of that aeroshell 64 grease in there. It sounds better but not quite like I recall it sounding before.
Installed it back into the bumper, rewired, zip-tied the leads so they don’t wiggle around, instead of installing a cut-off switch.
Tomorrow I’ll remove the sway bar so I can get a good purchase on the rear bolts. This weekend I’m going to wash and reinstall the rope and replace it if it’s seen better days- it’s nearly four years old.
Installed it back into the bumper, rewired, zip-tied the leads so they don’t wiggle around, instead of installing a cut-off switch.
Tomorrow I’ll remove the sway bar so I can get a good purchase on the rear bolts. This weekend I’m going to wash and reinstall the rope and replace it if it’s seen better days- it’s nearly four years old. 
Andy5160
Hooked
Looks like you had to winch every trip since you recall how it soundsReassembled the winch, thanks WARN! Cleaned the old grease out of the gear-set and applied a healthy amount of that aeroshell 64 grease in there. It sounds better but not quite like I recall it sounding before.
Installed it back into the bumper, rewired, zip-tied the leads so they don’t wiggle around, instead of installing a cut-off switch.
View attachment 426281
Mike Pierson
Hooked
Have only had to use it in the snow, but yeah, have used it a ton.Looks like you had to winch every trip since you recall how it sounds
Ddays
Hooked
I've tried to let this pass this but it's been buggin me like a splinter all goddam week......damn man!
Mike Pierson
Hooked
Is it the fact that Bob and Adam are in agreement for once? Haha
jeeeep
Hooked
hmmm... that's where the cold air is coming from, cold day in hell
bobfriesenhahn
Hooked
Actually, we are in agreement more often than not. Soon we will be buds!
DirtHeadDavis
Hooked
Glad it's back on the Jeep Mike! Shoutout to WARN again for sure 